Garage door openers are usually designed to provide us years of hassle-free service, but they do break down with too much workout. There are several repairs that don’t require a lot of money and special equipment. With a little troubleshooting, a costly service can be avoided that can get your garage door opener to function again in no time. But if you notice that the problem is quite technical, then you need to contact a professional garage door repair company in Vancouver for better service.
Few troubleshoots for faulty door openers are:
1. The remote works but the wall switch doesn’t:
Fix: Replace the wall switch or wires If the opener is operating perfectly with remote but the wall switch isn’t functioning, then you may need to replace either the switch or the switch wires. Check to see the actual problem area, is it the wires or the switch itself. You can test it by unscrewing the switch from the wall and placing the two wires together so that they touch each other. If the opener runs, then it’s a bad switch problem. If the door opener doesn’t run, then it’s clear that the switch wires are bad.
2. The wall switch works but remote doesn’t:
Fix: Replace batteries or buy a new remote. Most common cause for remote not working is faulty batteries. If the battery inside a remote is over a year old, then it may be the possible reason for its malfunctioning. A normal battery life, if used on a daily basis is for one year. Replace the old batteries with a new one and then check if it’s working now. If not, then there is surely a problem with the remote. You need to get it repaired or completely replaced by a technician as soon as possible.
If your garage door opener model is quite an old one and it seems impossible to find a remote for that model, then opt for a universal remote or a receiver. A receiver will replace the radio frequency of the opener with its own.
3. The door goes up, but doesn’t come down until the wall switch is pressed:
Fix: Align or replace the safety sensor If the door isn’t operating perfectly i.e., it’s going up but isn’t coming down at its own, then you need to check the alignment of safety sensors. There is a small light placed on each sensor which should light up when there is nothing between them. You should replace the sensors, if they are gone bad or if no light is shown up.
4. Opener makes a grinding noise, but the door doesn’t move:
Fix: Check the main drive gear. There are chances of a problem with the main drive gear if the door isn’t opening despite making a grinding noise. The main drive gear is a common component that fails on most door openers. It is actually a plastic gear that comes in direct contact with the drive gear on the motor. You need to hire an experienced overhead door repair technician to get this component replaced as its bit complicated.
A garage is a significant place of residential and commercial purpose and use very frequently in a day or a week and also for different reasons. The main aim of having garages to store their valuable things. Garages are mainly used for automobiles to keep safe. Except for avoiding damage, to keep them safe from weather that can be harmful many times for motors. The garage may be used as extra space for storage.
In garage door category, there are two types of garage doors are Automatic Garage Doors and Manual. Both Manual and automatic doors are installed by following few easy and simple steps.
For both manual and automatic garage doors are easy to install, but the steps are different to fit a door. Garage door service is the main factor after installing door and available an instant when it requires and also at an affordable price. Repair of those doors is very tricky work, and this requires very specialized in professional and experts. They are highly trained and know every technique of repairing and service is a significant issue for the homeowner because if the door is not working correctly, then everything is unsafe. So never forget to check service factor of companies or supplier.
In the garage door, there are two main components the opener and the door itself, so diagnose an issue and contact concern person. For the garage, the owner keeps in mind that only one person solves most problems with any standard tools like drill bits, a drill, an open-end wrench, and a hex wrench. Springs will get weak and may break after sometimes due to regular use, so repair these springs time to time for avoiding the long problem because both manual and automatic garage door use these springs.
Belt, Chain, Screw, Spring, direct drive and the openers accessories including but keypads, remotes, wall buttons and more are commonly used components in garage doors. Those parts may be used in the problem of the garage door. Garage door service includes repair and in so many cases replacement also. Replacement is a rare option because most issues are solved easily by professionals.